Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1057 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No network on Post DNAT

sebou
I've a little problem with Astaro 2.0 in DNAT definition : 

I can't choose a network in Post DNAT destination, only "No hosts defined" appear in the pulldown list.

What i'm doing wrong ? 

another question :
is an IP adress works in Host name definition ? my domain looks like "myhome.net" and not "me.myhome.net"

(sorry, my english's bad)

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    go to definition-->network
    define a new host
    name           -- ipaddress -- network mask
    yourserverNAME -- yourIP    -- 255.255.255.255
    this gives a single hosts address.
    after this go back to your DNAT and there should be a Post DNAT which shows yourserverNAME.
    hope this helps
Reply
  • 0
    go to definition-->network
    define a new host
    name           -- ipaddress -- network mask
    yourserverNAME -- yourIP    -- 255.255.255.255
    this gives a single hosts address.
    after this go back to your DNAT and there should be a Post DNAT which shows yourserverNAME.
    hope this helps
Children
Unfiltered HTML