Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I don't know what is going wrong????

This is the setting what i do:
eth0:192.168.0.3 255.255.255.0
eth1:61.142.133.45 255.255.254.0
default gateway:61.142.133.1
"Proxy ARP on this Interface" is not set on eth0 and eth1."IP Aliases" not set anythings
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
61.142.132.0    0.0.0.0         255.255.254.0   U     0      0        0 eth1
0.0.0.0         61.142.132.1    0.0.0.0         UG    0      0        0 eth1
"SNAT DNAT Masquerading " there is not set anythings.
all Packet Filter rules are disable
Http proxy allow network is Private network.
DNS proxy allow network is Private network.
a client computer network setting is IP:192.168.0.100 mask:255.255.255.0 gateway:192.168.0.3 DNS:192.168.0.3 

My Q is why the client can explorer the web site?and how can i setting upo a client can receive email use POP?
  [:S]


This thread was automatically locked due to age.
  • I guess the problem is The default gateway,right?
    Tom ,where are you?
  • hi,

    i think that you allowed in the http/dns-proxy settings complete privat-networks or not ? There's no futher need to define any additional rules for allowing access to the internet (http/dns).

    For receiving emails via POP3 you have to define a rule like this (for example):

    {private networks} POP3 ANY ALLOW

    ...and don't forget masquerading ({private networks} -> eth1 (Your external interface)  !

    Maybe I could help you a little bit ?!? ;-)

    claus
  • Thanks you reply,and i will try it.any Q i will consult you again.


    And now, everythings is work.thanks again.

    [ 08 October 2001: Message edited by: iMyWay ]