This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routes

Hi,

I need some help with a routeing problem i got...

BOX1 eth0: 192.168.10.0/24
eth1: 212.112.42.60

BOX2 eth0 192.168.20.0/24
eth1 213.73.4.10

On the 20.0/24 net i got two ISDN routers 20.2 and 20.3 they both go to an 192.168.50.0/24 and 192.168.70.0/24 net. How do i setup the routes on BOX1 so the 10.0/24 net can access the 70.0/24 and 50.0/24 net?

I have setup static routes on BOX2 to 70.0/24 -> 20.2 etc, and i can acces 70.1 etc from the 20.0/24 net. VPN are also working fine between 10.0/24 and 20.0/24.

Hope i made my problem clear enuff....

/Tony

This thread was automatically locked due to age.

Parents

0 tom_01 over 23 years ago

do I understand correctly:

1. BOX1 and BOX2 are ASLs connected by VPN via the Internet
2. BOX2 has ISDN routers behind it in the LAN
3. BOX1 LAN should access networks behind ISDN routers, so the desired path is

LANBOX1->BOX1->VPN->BOX2->LANBOX2->ISDNROUTER->ISDNLAN

correct ?

/tom
Cancel
Vote Up 0 Vote Down

Cancel
0 tony_01 over 23 years ago in reply to tom_01

That is all correct, just what i wana do.

/Tony
Cancel
Vote Up 0 Vote Down

Cancel
0 tony_01 over 23 years ago in reply to tony_01

Think i found an way, i made a new VPN connection from BOX1-BOX2 but this time on the remote subnet on BOX1 i added the 50.0/24 net and same on BOX2 for localnet.

This made it work anyway, so is that the correct way to do it?

/Tony
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 tony_01 over 23 years ago in reply to tony_01

Think i found an way, i made a new VPN connection from BOX1-BOX2 but this time on the remote subnet on BOX1 i added the 50.0/24 net and same on BOX2 for localnet.

This made it work anyway, so is that the correct way to do it?

/Tony
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data