Network Protection: Firewall, NAT, QoS, & IPS multiple ips on ext interface

UTM Firewall requires membership for participation - click to join

Thread Info

State Not Answered
Locked Locked
Replies 1 reply
Subscribers 2 subscribers
Views 1104 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

multiple ips on ext interface

Jon Griffin over 23 years ago

What is the way to make the external interface listen on more than on IP?

This thread was automatically locked due to age.

Parents

0 Darryl Smith over 23 years ago
G'Day

Basically you need to type

But this will only update it until the next reboot... You will also need to add this to a script in /etc/rc.d with a link to /etc/rc.d/rc2.d to have it run at each boot.

You will need to define the various IP addresses yourself in the NETWORK part of the WebAdmin, as well as setting up some static routing if required.

The original answer can be found at
http://www.astaro.org/cgi/ultimatebb.cgi?ubb=get_topic&f=3&t=000174

Darryl
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Darryl Smith over 23 years ago
G'Day

Basically you need to type

But this will only update it until the next reboot... You will also need to add this to a script in /etc/rc.d with a link to /etc/rc.d/rc2.d to have it run at each boot.

You will need to define the various IP addresses yourself in the NETWORK part of the WebAdmin, as well as setting up some static routing if required.

The original answer can be found at
http://www.astaro.org/cgi/ultimatebb.cgi?ubb=get_topic&f=3&t=000174

Darryl
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data