This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SNAT problem in Firmware 9.707.

Hi,

Someone have problems with SNAT? SNAT ( Hide NAT ) from LAN to Internet.

After PPP interface is reconnected and received new / different IPv4 address, the UTMv9 is still using the old IPv4 address for old sessions ( verification using tcpdump ).

Sometimes it resolves by it self ... and sometimes after restart ...

It's sporadic and I was unable to understand why it's happening.

When there is a problem, new sessions are working and SNAT is using new IPv4.

In version 9.705-3 and before worked flawlessly with the same configuration.

Is there a way to clear NAT cache?

* Unable to open a case. I'm using free UTMv9 for personal testing purposes as VM ( although license specifies that I should be able to open a case ... but it seems that this option lost in Sophos on the way ... ).

Thank You.

This thread was automatically locked due to age.

Top Replies

BAlfson over 3 years ago in reply to Alexey Haritonov +1

Assuming that "ISP Partner Fiber" is your external interface connected to your ISP, that should work. UTM "culture" is to also select 'Automatic Firewall rule'. Instead of using an SNAT, the "standard…

Parents

BAlfson over 3 years ago

Shalom Alexey and welcome to the UTM Community!

Please insert a picture of the Edit of your SNAT.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
Alexey Haritonov over 3 years ago in reply to BAlfson

Hi,

Thank You for the reply.

My SNAT conf:
Cancel
Vote Up 0 Vote Down

Cancel
Amodin over 3 years ago in reply to Alexey Haritonov

Wouldn't your Internet IPv4 instead be using the External (WAN) (Address) interface?
Cancel
Vote Up 0 Vote Down

Cancel
BAlfson over 3 years ago in reply to Alexey Haritonov

Assuming that "ISP Partner Fiber" is your external interface connected to your ISP, that should work. UTM "culture" is to also select 'Automatic Firewall rule'.

Instead of using an SNAT, the "standard" way to do this in UTM is with a Masquerading rule:

Cheers - Bob
Cancel
Vote Up +1 Vote Down

Cancel
Alexey Haritonov over 3 years ago in reply to Amodin

Yep ... ppp0 interface should use new ISP IPv4 ... but it using old IPv4 ... or ... in rear occasions doesn't use SNAT and traffic goes out with private IP address.

See tcpdump:

ICMP to 8.8.8.8 is using "old" IPv4 83.130.88.100 ... obviously has no ICMP Replies.

Using new IPv4 83.130.91.88, is working and there are ICMP replies ( UTM changed it by itself ... no intervention from my part ).

At the same time ppp0 interface and object "ISP Partner Fiber (Address) display correct IPv4 address: 83.130.91.88.

So ... it's definitely a BUG.
Cancel
Vote Up 0 Vote Down

Cancel
Alexey Haritonov over 3 years ago in reply to BAlfson

hi, thank You for the feedback.

I will try to change to Masquerading rule, instead of SNAT ... as I don't care if it's a BUG and Sophos doesn't want to fix it ... I just need that my environment will function.
Cancel
Vote Up 0 Vote Down

Cancel
Alexey Haritonov over 3 years ago in reply to BAlfson

Hi, the same thing with Masquerading rule ... already reverted to 9.705-3 ... going to try even lower firmware version ...
Cancel
Vote Up 0 Vote Down

Cancel
BAlfson over 3 years ago in reply to Alexey Haritonov

Good luck with that. This sounds more like a broken config - it's rare, but that can happen when applying an Up2Date. Try restoring a backup made before you applied the last Up2Dates.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Reply

BAlfson over 3 years ago in reply to Alexey Haritonov

Good luck with that. This sounds more like a broken config - it's rare, but that can happen when applying an Up2Date. Try restoring a backup made before you applied the last Up2Dates.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data