Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 4 subscribers
  • Views 902 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Guest WLAN block to Internal

M2019

I have the following problem when I set up Guest WLAN and don't exclude it in the filter rules of Web-Proction and with Network-Protection Guest WLAN to Internal Drop. If I get into the internal network via port scan, via FQDN or IP.

Do you have a solution?

Please excuse my bad english.



This thread was automatically locked due to age.
Parents
  • 0

    You need a separate Filter Profile, Policy, and Filter Action for guests.   In the websites section of the Filter Action, you need to block all possible host names and I.P. addresses for the internal network.

  • 0 in reply to DouglasFoster

    Hi, ok, i have test, but than block in the internat network the same adress.

     
    Sophos goes first rule then second, and so on. First rule is internal there is release and disabled in second then, but I have internel same problem.
    And because of IP blocking does not work well, you have a good guide from the network?
     
     Thank you
     
     

Reply
  • 0 in reply to DouglasFoster

    Hi, ok, i have test, but than block in the internat network the same adress.

     
    Sophos goes first rule then second, and so on. First rule is internal there is release and disabled in second then, but I have internel same problem.
    And because of IP blocking does not work well, you have a good guide from the network?
     
     Thank you
     
     

Children
Unfiltered HTML