Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 8 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 1650 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

outbound nat

lior me

hi

i have a utm9 with 2 interfaces

interface 1 192.168.4.170, going out via 192.168.4.1, so far so good. everything going out via 4.170 works just fine

interface 2 192.168.82.170 going out via 192.168.82.1 (policy route). when i'm pinging from interface 2, everything is ok and going out via 192.168.82.1 (using sophos tools from inside the utm)

but when i'm sending packets from any host in 192.168.82.0/24, the traffic still going out via interface 1

i've done a dnat, but i must be doing something wrong

 

thank you 

 



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to lior me

    OK. I think your problem could be solved by using a SNAT Rule. These are created under Network Protection -> NAT.
    I'll show you one example which should fit your needs.

    Put in the source one of your servers. The service and destination should fit.
    Now specify in change source the public IP you want that server to send.
    Please let me know if this is working for you.

    Best regards

    Alex

Children