Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 4 subscribers
  • Views 8637 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Monitor Number of PPTP VPN Connections via SNMP

BrianLong

I need to monitor # of active PPTP VPN connections via SNMP on UTM9 SG330. How can I do this?  What OID?

We use PRTG for our monitoring.  With our previous VPN solution, I was able to query this information and could always see how many people were connected at a glance.

I need to monitor # of active PPTP VPN connections via SNMP on UTM9 SG330. How can I do this?  What OID?



This thread was automatically locked due to age.
Parents
  • 0

    Good evening Brian.  The vast majority of those who would answer here are other users, not anyone from Sophos, as this is a user-to-user forum.  If you need/want to contact Sophos staff, you'd need to open up a case with support (for paid licensees only, but I'm assuming you are with a SG330).  

    See https://www.sophos.com/en-us/support/knowledgebase/119371.aspx

    The UTM notification specific traps MIB file can be downloaded from WebAdmin at Management>>SNMP.  All of the others used by the UTM are linux standard and you can get them using WinSCP from the shell at /var/sec/chroot-snmp/usr/share/snmp/mibs/.  With all of these, you can walk through with a MIB browser and see if what you want is in there.

Reply
  • 0

    Good evening Brian.  The vast majority of those who would answer here are other users, not anyone from Sophos, as this is a user-to-user forum.  If you need/want to contact Sophos staff, you'd need to open up a case with support (for paid licensees only, but I'm assuming you are with a SG330).  

    See https://www.sophos.com/en-us/support/knowledgebase/119371.aspx

    The UTM notification specific traps MIB file can be downloaded from WebAdmin at Management>>SNMP.  All of the others used by the UTM are linux standard and you can get them using WinSCP from the shell at /var/sec/chroot-snmp/usr/share/snmp/mibs/.  With all of these, you can walk through with a MIB browser and see if what you want is in there.

Children
No Data