Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 1915 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Outbound access failing with new network

Longman
I have added an additional network attached to eth3 on the Sophos firewall with the following details:

HP2920 Switch
IP: 192.168.75.253
MASK: 255.255.255.0
DG: 192.168.75.254 (Sophos Eth3)

SOPHOS FIREWALL ETH3
IP: 192.168.75.254
MASK: 255.255.255.0
DG: 

Now what I expected is that a client with a default gateway of 192.168.75.253 should be able to get internet access, but it doesn't work

CLIENT (doesn't work - I see nothing in the firewall log)
IP: 192.168.75.1
MASK: 255.255.255.0
DG: 192.168.75.253 (HP2920 Switch)
Dns: 8.8.8.8

CLIENT (works)
IP: 192.168.75.1
MASK: 255.255.255.0
DG: 192.168.75.254 (Sophos Eth3)
Dns: 8.8.8.8

The resellers engineer is at a loss. I have tried a different switch with the same results. I am running version 9.309-3.


This thread was automatically locked due to age.
Parents
  • 0
    have you entered on the 2920 only the Default Gateway info or did you Change to Layer3 mode and have specified a Default rule for this vlan/Network on the 2920?

    EDIT: can you check in Firewall -> Advanced whether Spoof protection is on? Tick the "log invalid packets" to see those blocked packets in Firewall logs
Reply
  • 0
    have you entered on the 2920 only the Default Gateway info or did you Change to Layer3 mode and have specified a Default rule for this vlan/Network on the 2920?

    EDIT: can you check in Firewall -> Advanced whether Spoof protection is on? Tick the "log invalid packets" to see those blocked packets in Firewall logs
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?