Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 1033 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 easy question

zerocoldgm
hi everyone,
I have two simple questions thank you in advance for your attention,

1) there is a system to see all ip connected to the router?
    And those in which the DHCP assigned IP manually?

2) Currently I have to test the product license "Home use only" 50 Max User.
What exactly is 50 User?
the IP that can simultaneously connect to the router?
If I connect with a laptop and is assigned an IP and I always unplug it after 50 devices can use?
I ask this because in the "Licenses - Ip Addresses Active" there is' a list of ip used by devices that are connected to the router does not quite understand what it means to that list

Thanks in advance
Roby


This thread was automatically locked due to age.
Parents
  • 0
    1)  You can see currently connected sessions via flow monitor, by clicking on the in or out bars for interfaces on the dashboard.  For more historical information you can check Logging & Reporting > Network Usage > Bandwidth Usage.  For IP addresses assigned via DHCP, see Network Services > DHCP > IPv4 Lease Table.

    2)  50 users is 50 IPs.  IPv4 and IPv6 are counted separately.  It counts use as passing traffic from one interface to another.  The list at Management > Licensing > Active IP Addresses is not  IPs currently in use.  Addresses are cleared from this list after 7 days.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 0
    1)  You can see currently connected sessions via flow monitor, by clicking on the in or out bars for interfaces on the dashboard.  For more historical information you can check Logging & Reporting > Network Usage > Bandwidth Usage.  For IP addresses assigned via DHCP, see Network Services > DHCP > IPv4 Lease Table.

    2)  50 users is 50 IPs.  IPv4 and IPv6 are counted separately.  It counts use as passing traffic from one interface to another.  The list at Management > Licensing > Active IP Addresses is not  IPs currently in use.  Addresses are cleared from this list after 7 days.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?