Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG 430 Initial config with 10 static IP's

Good day all,

I am the new owner of a SG430 with two 8-port FlexiPort modules and updated to 9.308-16.

The question is, how to configure for use of 10+ static IP's from three ISP's for hosted customers?

Do I configure 1 IP per port with New Masquerading Rule...
Or
specify "Additional Addresses" for eth1-eth3

And is there a KB article on how to?

Thanks
Steve


This thread was automatically locked due to age.
Parents
  • This sounds like a bad idea.  If you are hosting things for customers, and you have multiple ISPs, things should be multihomed with BGP and your own address block.  I get the feeling that you are looking for things that can't or shouldn't be done.
    If you are looking for redundancy for customer hosting with multiple ISPs, you need more than a single SG430 and a couple static IPs, unless uptime isn't a consideration, though three ISPs does indicates a desire for uptime.

    Do you have a partner and a support subscription?  They should be your first point of contact for this, and if they don't know surely somebody else can recommend a partner to work with.
Reply
  • This sounds like a bad idea.  If you are hosting things for customers, and you have multiple ISPs, things should be multihomed with BGP and your own address block.  I get the feeling that you are looking for things that can't or shouldn't be done.
    If you are looking for redundancy for customer hosting with multiple ISPs, you need more than a single SG430 and a couple static IPs, unless uptime isn't a consideration, though three ISPs does indicates a desire for uptime.

    Do you have a partner and a support subscription?  They should be your first point of contact for this, and if they don't know surely somebody else can recommend a partner to work with.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?