Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAP VLAN traffic blocked by firewall

I have a WRT610N, running DD-WRT, as my WAP connected to my Sophos UTM. I configured a virtual wireless interface on my WAPP to separate trusted and untrusted host traffic.  Logical diagram follows:
Network2.png

I have eth1 configured with two virtual interfaces; VLAN2 (trusted) and VLAN5 (untrusted).
interfaces.png

I modified the default firewall rules for DNS, Email, and web to include the two virtual interfaces.
firewall.png

I logged into the UTM console and ran tcpdump to verify I was receiving only VLAN2 and VLAN5 tags on eth2.  Both subnets get IPs via DHCP from the UTM but only VLAN 2 can reach the internet.  VLAN5 is denied DNS traffic and cannot resolve any address.  The FW log follows:
fwlog.jpg

I am at a loss on how to resolve this.  It seems like the FW rules are being ignored for only one of the virtual subnets.


This thread was automatically locked due to age.
Parents
  • Thanks to all with the replies.  Everything is working now!

    I was so focused on the firewall log that I missed the underlying reason.  I am thinking the DNS linkage was either prompted are occurred automatically during my initial install.  VLAN5 is the first interface I have added since my original install.
Reply
  • Thanks to all with the replies.  Everything is working now!

    I was so focused on the firewall log that I missed the underlying reason.  I am thinking the DNS linkage was either prompted are occurred automatically during my initial install.  VLAN5 is the first interface I have added since my original install.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?