Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 22 replies
  • Subscribers 2 subscribers
  • Views 10646 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

need help planning a DMZ and guest network

sheetzdw
I am using the free UTM 9.1 and installed it on a 4 core amd pc with a 256GB SSD and 8 gigs of ram, it has 5 network cards in it. 
I am looking for the best suggestions how to configure the network
 
 

  • I want an unsecured wireless guest network with its on DHCP scope , 
  •  a DMZ for my own domain website as well as remote and mail servers , 
  •   a full dhcp scope for my private uber secure network 
  • secured wireless netowrk with DHCP scope connected to my private LAN


I can see the network cards under the interface list but since they are all the same I cant figure out which is which.. I am sure I can find a way

I do have my own domain name and 5 static IP's from my ISP which will be used for my DMZ, I am assuming I can use 1 static IP to NAT to the guest network

any suggestions or caveats  to watch out for would be welcome, I am familiar with Cisco and Watchguard firewalls but not Sophos UTM

Thanks in advance


This thread was automatically locked due to age.
Parents
  • 0
    AMD and Intel consumer grade processors can be set to run at specific speeds regardless of load as long as you have motherboard that supports these features.
  • 0 in reply to mikeownage
    AMD and Intel consumer grade processors can be set to run at specific speeds regardless of load as long as you have motherboard that supports these features.


    no as granular as you think.  When you do that you defeat the power savgins most of the time.  If you want to leave it constantly pegged sure you can do that..but there's no reason to do that with either right sized hardware or virtualization.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • 0 in reply to mikeownage
    AMD and Intel consumer grade processors can be set to run at specific speeds regardless of load as long as you have motherboard that supports these features.


    no as granular as you think.  When you do that you defeat the power savgins most of the time.  If you want to leave it constantly pegged sure you can do that..but there's no reason to do that with either right sized hardware or virtualization.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?