Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 2634 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.x vLan setup

edisoninfo
I have a UTM setup and working fine except for vlan's. As soon as I change the internal nic from "Ethernet Static" to "Ethernet vlan" I loose connection to the UTM device. If I just try to add a new interface, the "hardware" field is empty. Nothing to select. How in the &*$*#$^ do you setup vlan's on this thing?


This thread was automatically locked due to age.
Parents
  • 0
    As you don't seem to have a spare NIC (Hardware filed empty), you could try to manage your UTM via the external Interface. 
    Just make sure that you can reach the management webinterface via the external Interface, connect a DHCP Server (e.g. spare router) to the external Interface if neccessary, then connect to your UTM and change "Ethernet static" to "Ethernet vlan" on your internal interface.
Reply
  • 0
    As you don't seem to have a spare NIC (Hardware filed empty), you could try to manage your UTM via the external Interface. 
    Just make sure that you can reach the management webinterface via the external Interface, connect a DHCP Server (e.g. spare router) to the external Interface if neccessary, then connect to your UTM and change "Ethernet static" to "Ethernet vlan" on your internal interface.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?