Hello, i have the following issue: i need to access a host (***.98.202.53) that's behind an interface on my UTM box, the interface is 192.168.10.x/24 with a .254 as default gateway and is configured as DHCP client. this IF is NOT set as default gateway(as it doesnt has access to anything BUt that host) on another interface i have the normal internet connection. now, i have done the following: [LIST=1] Configured the interface "private" as DHCP client, it gets IP 192.168.70.2/24 Made a host definition for that IF GW (192.168.0.254) bound to the "private" IF Made a host definition for the specific host (***.98.202.53) bound to the "private" IF as well Made a PF rule allowing LAN->host Made a policy route, type gateway, from LAN-> host, gateway "private GW" [/LIST] and it doesn't works, i can see a initial packet loaded in PF live log but no ping, no traceroute pass, if i traceroute from UTM itself it goes to internet, ping from lan or utm also fail. I tried making a static gateway router, with same definition, no avail. What am i doing wrong?, or the problem is not on my UTM and instead is a routing table issue on the .254 gateway?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

dyn/static route on 2nd IF not working?

Hello,
i have the following issue: i need to access a host (***.98.202.53) that's behind an interface on my UTM box, the interface is 192.168.10.x/24 with a .254 as default gateway and is configured as DHCP client.
this IF is NOT set as default gateway(as it doesnt has access to anything BUt that host)
on another interface i have the normal internet connection.

now, i have done the following:

[LIST=1]

Configured the interface "private" as DHCP client, it gets IP 192.168.70.2/24
Made a host definition for that IF GW (192.168.0.254) bound to the "private" IF
Made a host definition for the specific host (***.98.202.53) bound to the "private" IF as well
Made a PF rule allowing LAN->host
Made a policy route, type gateway, from LAN-> host, gateway "private GW"

[/LIST]

and it doesn't works, i can see a initial packet loaded in PF live log but no ping, no traceroute pass, if i traceroute from UTM itself it goes to internet, ping from lan or utm also fail.

I tried making a static gateway router, with same definition, no avail.

What am i doing wrong?, or the problem is not on my UTM and instead is a routing table issue on the .254 gateway?

This thread was automatically locked due to age.

Parents

0 Mast_01 over 11 years ago

Bob,
there's no gateway defined on that interface, i posted it for clarity sake indicating that that's the gateway that needs to be used to access the host.
i've removed all bindings and still doesn't works, i need to go onsite to test with a directly connected computer to that end and then i'll see
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Mast_01 over 11 years ago

Bob,
there's no gateway defined on that interface, i posted it for clarity sake indicating that that's the gateway that needs to be used to access the host.
i've removed all bindings and still doesn't works, i need to go onsite to test with a directly connected computer to that end and then i'll see
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data