Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 1827 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Certain S2S traffic through fix interface

IngoPohlschneider
Hello
we got some WAN-boosters in some branch offices. The booster at our headquarters is limited in its "optimized throughput"

Therefore I'd like to make sure that only traffic coming from a network that is optimized is passed to the booster.
I'd like to do that by sending the traffic from the S2S tunnels that have a booster through one of the local interfaces, where I would then connect the booster mainunit.

All other traffic (from other VPN, the Internet etc.) should leave over another LAN interface.

How do I do that? via a policy route?

The booster is an inline-device. It will be attached between the interface and the L3-LAN switch

See attached schematic

Best regards


This thread was automatically locked due to age.
Parents
  • 0
    I think you only need the policy route in the UTM and to define the VPN between the two sites correctly.   It should work as you've diagrammed it. 

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Reply
  • 0
    I think you only need the policy route in the UTM and to define the VPN between the two sites correctly.   It should work as you've diagrammed it. 

    Cheers - Bob

    Sorry for any short responses.  Posted from my iPhone.
Children
No Data