Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1710 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLANs, Trunking and routing between UTM 320 and Dell PowerConnect 7024

annam
Hi all,
I have a UTM 320 with Lag0 include 4port. I create 3 Vlan on Lag0:
Vlan 311 on lag0 (VLAN 311) [10.11.11.20/24]
Vlan 316 on lag0 (VLAN 316) [10.11.16.20/24]
Vlan 322 on lag0 (VLAN 322) [10.11.22.20/24]
I trunk UTM and Switch Dell PowerConnect 7024. ping from switch to UTM ok, but when i connect a PC to switch and tag to vlan, i can't ping from PC to UTM although ping from PC to 7024 is ok.
Someone show me that problem!
P/s: I'm Vietnamese and my English is not good!
Thanks![:S]


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to annam
    Hi!
    Is ICMP on the UTM allowed?

    Make sure that you have ICMP in the firewall settings allowed.

    That is under Network Protection -> Firewall -> ICMP

    Make sure Allow ICMP on Gateway is checked.

    Also make sure Gateway is Ping visible, is checked.  I don't know if you need ICMP checked if the other one is, but I'd do it just to be safe.
Children
No Data