Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

utm 9 - problem with dhcp and serveral networkcards

hello
i am new on this forum an sophos utm.

what i have is a PC with a virtual runnning mashine with sophos utm 9 and the free licencs for 50 IPs. the PC has 3 network cards.

what i want to do is:
connect 1 card to my personal lan which has access to the internet. (router 192.168.2.1)
connect card 2 to another router (192.168.179.1) an connect card 3 to the guest network, traffice on the guest network should go to card 3 trough sophos utm an should be connected to the internet over card 2. on card 3 a DHCP should run.

could this be realized, if yes, what do i have to configure?


This thread was automatically locked due to age.
Parents
  • image-3618817632.jpg

    guestnet AP is realized over vlan which isn't shown for convenience.

    green is 192.168.2.1 / 255.255.255.0
    red is 192.168.179.1 / 255.255.255.0
    red and green are not connect in the fritzbox, they are separated.

    card 1 only for administratiom

    traffic from card 3 to 2 trough UTM
Reply
  • image-3618817632.jpg

    guestnet AP is realized over vlan which isn't shown for convenience.

    green is 192.168.2.1 / 255.255.255.0
    red is 192.168.179.1 / 255.255.255.0
    red and green are not connect in the fritzbox, they are separated.

    card 1 only for administratiom

    traffic from card 3 to 2 trough UTM
Children
No Data