Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web protection empty logs

My first post on the forums...hope you can help me out!  I'm running UTM 9 home edition and most things are running good.  I've setup the web filtering options and it's working, as in it filters out sites, but when I go to the Web Protection section of logging/reporting it shows nothing.  The live log also doesn't show any accessed sites.  I'm not using "users" but I have setup all my computers/devices as hosts with static DHCP.  I've made sure "Log Accessed Pages" and "Log Blocked pages" is checked under the Advanced setttings tab of Web Protection.  

Could it be that I'm running this on a P4 with 1gig of RAM?  The RAM utilization is usually around 65% +. 

Thanks!


This thread was automatically locked due to age.
Parents
  • I checked the filter page and I'm allowing all internal networks.  I also have it set for transparent mode.  

    I changed it to standard mode but I found I had to have the computers/devices point to the proxy port for the filter to work, otherwise everything was wide open.  It did start to report some sites when I was in standard mode (but only IPs, not FQDNs).

    So:
    1.  Transparent mode = filtering everyone but no reporting
    2.  Standard = filtering only those pointing to the proxy ports and reporting

    I hoping that in transparent mode it would report all the activity.  Is that not the case?
Reply
  • I checked the filter page and I'm allowing all internal networks.  I also have it set for transparent mode.  

    I changed it to standard mode but I found I had to have the computers/devices point to the proxy port for the filter to work, otherwise everything was wide open.  It did start to report some sites when I was in standard mode (but only IPs, not FQDNs).

    So:
    1.  Transparent mode = filtering everyone but no reporting
    2.  Standard = filtering only those pointing to the proxy ports and reporting

    I hoping that in transparent mode it would report all the activity.  Is that not the case?
Children
No Data