Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to config DHCP Relay

Hi everyone, i have a problem need your help about DHCP Relay

And this is my network

Astaro 220 version 7 : 03 interface
          Interface 0 ( LAN ) : 192.168.0.1/24
          Interface 1 ( WAN ) : 192.168.1.1/24
          Interface 2 ( DHCP Relay ) : 192.168.3.1/24
I have 01 DC used windows 2008 ( DNS, DHCP ) : 192.168.0.3
         01 wireless router 192.168.3.2

I config DHCP Relay like this
           Network Services --> DHCP --> Relay --> Enable
                       DHCP : DC
                       Interface : Interface 0 + Interface 2

And i use the laptop test but can not receive the ip, ip I receive like 169.254.x.x

From DC 192.168.0.1 ping 192.168.3.1 --> reply
but   DC 192.168.0.1 ping IP wireless router 192.168.3.2 --> request time out

Did i miss something [:(], please help me solve this problem


This thread was automatically locked due to age.
Parents
  • Hi everyone, i have a problem need your help about DHCP Relay

    And this is my network

    Astaro 220 version 7 : 03 interface
              Interface 0 ( LAN ) : 192.168.0.1/24
              Interface 1 ( WAN ) : 192.168.1.1/24
              Interface 2 ( DHCP Relay ) : 192.168.3.1/24
    I have 01 DC used windows 2008 ( DNS, DHCP ) : 192.168.0.3
             01 wireless router 192.168.3.2

    I config DHCP Relay like this
               Network Services --> DHCP --> Relay --> Enable
                           DHCP : DC
                           Interface : Interface 0 + Interface 2

    And i use the laptop test but can not receive the ip, ip I receive like 169.254.x.x

    From DC 192.168.0.1 ping 192.168.3.1 --> reply
    but   DC 192.168.0.1 ping IP wireless router 192.168.3.2 --> request time out

    Did i miss something [:(], please help me solve this problem


    Stupid question: There is a 192.168.3.x-Range configured on the DHCP server?

    Troubleshooting Tip: Do you get a correct IP if you connect the Laptop to Interface 2 via cable? If yes, problem is within or behind Wireless Router. 

    The "ping"-issue can be a) a packet filter rule problem, as 192.168.3.1 is utm-ip which is pingable by default. Or b) it is a routing issue. Make sure 192.168.3.2 has 192.168.3.1 as default gw (or at least route to 192.168.0.0/24)

    Kind regards,
    Matthias
Reply
  • Hi everyone, i have a problem need your help about DHCP Relay

    And this is my network

    Astaro 220 version 7 : 03 interface
              Interface 0 ( LAN ) : 192.168.0.1/24
              Interface 1 ( WAN ) : 192.168.1.1/24
              Interface 2 ( DHCP Relay ) : 192.168.3.1/24
    I have 01 DC used windows 2008 ( DNS, DHCP ) : 192.168.0.3
             01 wireless router 192.168.3.2

    I config DHCP Relay like this
               Network Services --> DHCP --> Relay --> Enable
                           DHCP : DC
                           Interface : Interface 0 + Interface 2

    And i use the laptop test but can not receive the ip, ip I receive like 169.254.x.x

    From DC 192.168.0.1 ping 192.168.3.1 --> reply
    but   DC 192.168.0.1 ping IP wireless router 192.168.3.2 --> request time out

    Did i miss something [:(], please help me solve this problem


    Stupid question: There is a 192.168.3.x-Range configured on the DHCP server?

    Troubleshooting Tip: Do you get a correct IP if you connect the Laptop to Interface 2 via cable? If yes, problem is within or behind Wireless Router. 

    The "ping"-issue can be a) a packet filter rule problem, as 192.168.3.1 is utm-ip which is pingable by default. Or b) it is a routing issue. Make sure 192.168.3.2 has 192.168.3.1 as default gw (or at least route to 192.168.0.0/24)

    Kind regards,
    Matthias
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?