Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 3258 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route Specific traffic via second WAN link

kkeshav
We host several websites behind the Astaro. One of the websites is seeing very high incoming traffic which is using up all our outbound bandwidth. We have a backup ISP that we want to connect to eth3 interface and only route the traffic for one of the Webservers to this interface. We never want this traffic to go over the primary wan interface. How do we go about doing this?


This thread was automatically locked due to age.
Parents
  • 0
    The best way to do what you ask is with Uplink Balancing and Multipath rules.

    In fact, you also could balance all traffic over the two connections and use QoS rules to guarantee outbound bandwidth to the other traffic.

    Cheers - Bob
Reply
  • 0
    The best way to do what you ask is with Uplink Balancing and Multipath rules.

    In fact, you also could balance all traffic over the two connections and use QoS rules to guarantee outbound bandwidth to the other traffic.

    Cheers - Bob
Children
  • 0 in reply to BAlfson
    Bob,

    Thanks for the reply. We do not own the IP and have seperate blocks assigned by the two ISP's. Since this is a webserver, we only want the traffic to go over the Second Interface. Any details you can provide regrading this configuration will be appericiated. All the examples I can see are for outbound traffic but not for inbound traffic to a hosted webserver.