Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 780 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Public IP's with ARP Proxy

eniac.blast
We have a public IP network with 32 IP addresses. We have connected the network at the unruts interface with one public IP. Now, we have a server connected on another interface with a public IP. How can we configure the Astaro to route (and know) this traffic on the untrust interface to this specific interface?

Thanks for any help.


This thread was automatically locked due to age.
  • 0
    Let's see if I understand.  For example, you have 97.98.99.0/27 and your ISP routes this subnet to the primary IP on your External interface 178.179.180.181.  You have 97.98.99.1/27 on your DMZ interface and 97.98.99.30 on the server in the DMZ.

    In this case, you need packet filter (firewall) rule(s) to allow the traffic you want to accept.  WebAdmin automatically creates the necessary routes between networks on interfaces and VPNs.  You can confirm that by looking at the 'Routes Table' tab in 'Support >> Advanced'.

    Cheers - Bob