I just got my GS108Tv2 switch and have started configuring vlan and so on using the guide that Barry had provided (Thanks Barry). However, I am not able to use vlan with my wireless AP-10. The AP is connected to port 3 on the switch with is untagged (see pic)
Vlan configuration
vlan 10 : trusted clients
vlan 20 :untrusted clients
vlan 50: DMZ
The error message I am getting is that AP can't find vlan 10.
2011:05:04-16:08:31 ap-10 aweclient: VLAN tagging is enabled but control connection to the ASG couldn't be established via VLAN (VLAN tag 10). Pull new config and reboot.
2011:05:04-16:08:31 ap-10 init: starting pid 807, tty '': '/etc/init.d/rcS K shutdown'
2011:05:04-16:08:31 ap-10 sysinit: cfg033579
2011:05:04-16:08:32 ap-10 kernel: [ 139.840000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
2011:05:04-16:08:32 ap-10 kernel: [ 139.840000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
2011:05:04-16:08:32 ap-10 kernel: [ 139.840000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
2011:05:04-16:08:32 ap-10 sysinit: interface not found.
2011:05:04-16:08:32 ap-10 sysinit: Channel 1 busy time 61/240ms, 25%
2011:05:04-17:09:32 ***** awed[2395]: AP 'A40000D709AC807': timed out after 61 seconds
2011:05:04-17:10:23 ***** awed[2395]: configuration: 1 APs, 1 networks, 0 network groups
2011:05:04-17:10:59 ***** awed[2395]: new connection from 192.168.2.1:56856
2011:05:04-17:10:59 ***** awed[2395]: send msg: ip:'192.168.2.1', id:'A40000D709AC807', type:'2', length:'448'
2011:05:04-17:11:01 ***** awed[2395]: send msg: ip:'192.168.2.1', id:'A40000D709AC807', type:'3', length:'16'
2011:05:04-16:11:01 ap-10 aweclient: VLAN tagging is enabled but control connection to the ASG couldn't be established via VLAN (VLAN tag 10). Pull new config and reboot.
2011:05:04-16:11:01 ap-10 init: starting pid 807, tty '': '/etc/init.d/rcS K shutdown'
2011:05:04-16:11:01 ap-10 sysinit: cfg033579
2011:05:04-16:11:02 ap-10 kernel: [ 139.970000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
2011:05:04-16:11:02 ap-10 kernel: [ 139.970000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
2011:05:04-16:11:02 ap-10 kernel: [ 139.970000] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
2011:05:04-16:11:02 ap-10 sysinit: interface not found.
2011:05:04-16:11:03 ap-10 sysinit: Channel 1 busy time 42/256ms, 16%
I have added the vlan interfaces under Wireless>Global Settings and I have enabled vlan tagging with ID 10. I have AP bridge to vlan for the specific SSID
Anyone able to assist?
Thanks
This thread was automatically locked due to age.
