Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 271 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 Noob Questions reg ASG220

ciphercore
Hello everybody,

as said, I'm a Noob with ASG appliances and I hope that you don't mind my 2 questions I've got to get my ASG220 working properly.

1.) I have a CISCO DSL Modem/Router which has an IP 88.***.***.*** and I gave the WAN Port an IP 192.168.***.*** from the Subnet in which the Server and the clients are. So, the question is: How and where do I have to set the route from 192.168.***.*** subnet to gain access to the 88.***.***.*** Cisco Router/Modem?

2.) Do I have to set in the ASG the DNS's which have been already set in the local client Network settings? If I have, well, where shall I do that at its best?

Thanks for your patiencs and your highly appreciated support!
Cipher


This thread was automatically locked due to age.
  • 0
    Hi, 

    1. you should already be able to access the 88.x address on the modem, assuming you have a packetfilter and MASQ so the traffic can get out.

    However, bridging the modem may work better than using a 192.168.x network outside the firewall.


    2. If you're using DHCP for the external Astaro interface, DNS will be setup automatically.
    You still should setup the DNS proxy for the LANs.

    Barry