Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 7211 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How do you monitor Astaro with SNMP in Nagios/Centreon?

banso_boy
hi,
We currently use Nagios with Centreon as the GUI as our monitoring system.
I am looking for ways to monitor our Astaro using our Nagios system with SNMP.
I have download Astaro MIBs and loaded in our monitoring  system but still don't know how to configure our Nagios system to get info about our Astaro system

Will be glad if anyone who has done this before or share some examples of how to set this.

thanks in advance.
Banso_boy


This thread was automatically locked due to age.
Parents
  • 0
    I finally figured out how to configure this on Centreon, in case anyone needs help let me know.

    My only worry now is that I get these OIDs and don't really know what they mean.
    I want to monitor,  the interfaces, as well as fans and temp etc if possible.

    I ran this command and got a huge chunk of information but don't know what each OID meant. see below

    snmpwalk -v 2c -c public 17x.x.x.x

    .
    .
    .
    RFC1213-MIB::ifOutDiscards.2 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.3 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.4 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.5 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.6 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.7 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.8 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.9 = Counter32: 0
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    .
    .
    .
    etc

    Where can I the translation for each OID.

    thanks
Reply
  • 0
    I finally figured out how to configure this on Centreon, in case anyone needs help let me know.

    My only worry now is that I get these OIDs and don't really know what they mean.
    I want to monitor,  the interfaces, as well as fans and temp etc if possible.

    I ran this command and got a huge chunk of information but don't know what each OID meant. see below

    snmpwalk -v 2c -c public 17x.x.x.x

    .
    .
    .
    RFC1213-MIB::ifOutDiscards.2 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.3 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.4 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.5 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.6 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.7 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.8 = Counter32: 0
    RFC1213-MIB::ifOutDiscards.9 = Counter32: 0
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    IP-MIB::ipNetToPhysicalType.3.ipv4."19x.16x.x.x" = INTEGER: dynamic(3)
    .
    .
    .
    etc

    Where can I the translation for each OID.

    thanks
Children
No Data