Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[8.000] Only one Link in Link Aggregation and Cisco Port Channel via LACP

Hi, I just installed v8 on one of our 320.
Works fine so far except of one thing.

I am having troubles creating a Port Channel with our Cisco Switch.
We have another 320 with v7.505 connected to the Cisco switch with Link Aggreagtion. It works like a charm.

I created another Port Channel on our Cisco and created a LAG on the ASG v8. I connected the cables but on the cisco switch there is only one Link in FA. The otherone is in SP.

I don't know why. The Port Channel is configured just like the other one with the V7.505.

Here is the Cisco config.

[SIZE="4"]PORT-CHANNEL 1[/SIZE] (working)

description Port-Channel to Cisco1
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk


interface GigabitEthernet0/27
 description Link1 in Port-Channel1 to Cisco1
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk
 channel-group 1 mode active


interface GigabitEthernet0/28
 description Link2 in Port-Channel1 to Cisco1
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk
 channel-group 1 mode active



[SIZE="4"]PORT-CHANNEL 4[/SIZE] (Not working)

interface Port-channel4          
 description Port-Channel to Cisco2
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk

interface GigabitEthernet0/7
 description Link1 to PortChannel4 Cisco2
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk
 channel-protocol lacp
 channel-group 4 mode active

interface GigabitEthernet0/8
 description Link2 to PortChannel4 Cisco2
 switchport trunk encapsulation dot1q
 switchport trunk native vlan ???
 switchport trunk allowed vlan 1,2,3,4,5,??? (Not the real VLANs)
 switchport mode trunk
 channel-protocol lacp
 channel-group 4 mode active


[SIZE="4"]SH LACP Neighbors[/SIZE]

Here is the show lacp neighbor:

Channel group 1 neighbors (working)

Partner's information:
 LACP port                        Admin  Oper   Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
Gi0/27    SA      32768     3cdf.1ec9.2b80  13s    0x0    0x1    0x11C   0x3D
Gi0/28    SA      32768     3cdf.1ec9.2b80  27s    0x0    0x1    0x11D   0x3D


Channel group 4 neighbors (not working)

Partner's information:

LACP port                        Admin  Oper   Port    Port
Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
Gi0/7     FA      255       001a.8c17.2f70   4s    0x0    0x11   0x1     0x3F
Gi0/8     SP     0         0000.0000.0000 4294967s    0x0    0x0    0x0     0x0

Is there a known issue or does anybody know what I am doing wrong?

Thanks
Tobias


This thread was automatically locked due to age.