Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 2 subscribers
  • Views 2632 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems with Meshed Cluster Setup

TPok
Hello,

I am trying to setup a Meshed Cluster Setup as described in the Astaro Cluster Deployment Guide on page 13. As long as all cables are patched everything is working fine.

Now I want to simulate what happens if a cable or device fails. As long as I remove one cable only from one Astaro to one internal switch everything is working as described. But in the case one internal switch fails, the hole link aggregation group on all Astaros go down. All Astaros switch to state 'unlinked' and now traffic is processed.

Can anybody please give me an advice what I did wrong?

Thank you in advance,
Stephan


This thread was automatically locked due to age.
Parents
  • 0
    Ahh, yes, lag0, I see that now.  I don't understand why you're having this problem, but please try setting the backup interface to lag0 to see if that changes anything.  If not, then try eth4.

    Whity, have you asked Astaro Support to look at your box and analyze the logs?

    Cheers - Bob
Reply
  • 0
    Ahh, yes, lag0, I see that now.  I don't understand why you're having this problem, but please try setting the backup interface to lag0 to see if that changes anything.  If not, then try eth4.

    Whity, have you asked Astaro Support to look at your box and analyze the logs?

    Cheers - Bob
Children
No Data