Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SMTP traffic direction

I have a small problem I need an answer to.

Basically I have an Astargo ASG220 ( V7.505)

with 2 adsl lines attached for uplink balancing.
On the other side of the unit (intenal) I have an exchange server on ip range 192.168.x.x
as well as my internal network.

My question is how do I ensure that the smtp traffic always leaves the astaro via the correct adsl line.

This setup works most of the time unless I do a reboot and then the SMTP traffic starts to go out which ever line re enables first. I want to force the SMTP traffic only to use 1 now matter what.

The mail still gets through on either line but obviously when the receiving server does a reverse DNS it does not match and the email is rejected.

Thanks in advance


This thread was automatically locked due to age.
Parents
  • My guess is that you'll have the same problem.  I assumed you already had a multipath rule in place like:

    Name - SMTP
    Source - Any
    Service - SMTP
    Destination - Internet
    Itf. Persistance - by interface


    The example you got from your reseller truly balances SMTP traffic between the two interfaces, and you would still need the RDNS suggestion I make above.  This is, indeed, the preferred way.

    If you "change source and destination to my Exchange server & external link" in the suggested Traffic Selector, it won't work.

    Cheers - Bob
Reply
  • My guess is that you'll have the same problem.  I assumed you already had a multipath rule in place like:

    Name - SMTP
    Source - Any
    Service - SMTP
    Destination - Internet
    Itf. Persistance - by interface


    The example you got from your reseller truly balances SMTP traffic between the two interfaces, and you would still need the RDNS suggestion I make above.  This is, indeed, the preferred way.

    If you "change source and destination to my Exchange server & external link" in the suggested Traffic Selector, it won't work.

    Cheers - Bob
Children
No Data