This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bandwidth throttling not working. Limits are in place even though policy is removed.

Hello.

I have a 100Mb link and I recently removed a 30Mb rule I had set on my WAN interface via the Network -> QoS menu.

Oddly there looks to be about an 8Mb/s cap on each connection.  I've tested from multiple locations ranging from 18Mb/s to 100Mb/s all with similar results.  No speeds over 900KB/s per connection and overall speed is always at the 30Mb/s threshold.

This all started after I switched to using Astaro from my previous redbox appliances.  The speed issues are across multiple protocols; ftp, ssh, http, https.

Any ideas?

This thread was automatically locked due to age.

0 BAlfson over 15 years ago

overall speed is always at the 30Mb/s threshold

Are you sure you pressed Apply after removing the rule?
Oddly there looks to be about an 8Mb/s cap on each connection. [...] No speeds over 900KB/s per connection

I'm lost: Which is it - 30Mb, 8Mb or 900KB?

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 fltnlow over 15 years ago in reply to BAlfson

30Mb/s total but per connection 8Mb/s.

I.e. I can have multiple connections that appear to be capped at 8Mb/s but totals are never over 30Mb/s.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 15 years ago

Please show pics of the 'Bandwidth Pools' tab for both the Internal and External interfaces.

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel