Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN MTU Problem/Bug?

I have VLAN on one network card enabled and set the MTU of all VLAN's to 7200 (it's a network card with RTL 8169SC chipset). But I only can send ping packets with 1472 bytes size without defragmentation. I looked into the ASG's Support/Advanced/Interface Tables page, and I found the network card listed with MTU 1500 but I set it to 7200 for all VLAN on this card in the Interfaces configuration page.
Is this a bug?


This thread was automatically locked due to age.
Parents
  • I have VLAN on one network card enabled and set the MTU of all VLAN's to 7200 (it's a network card with RTL 8169SC chipset). But I only can send ping packets with 1472 bytes size without defragmentation. I looked into the ASG's Support/Advanced/Interface Tables page, and I found the network card listed with MTU 1500 but I set it to 7200 for all VLAN on this card in the Interfaces configuration page.
    Is this a bug?


    Hello,
    in the meantime I started ifconfig from console, here is the output:

    eth1      Link encap:Ethernet  HWaddr ***
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5114 errors:60 dropped:14 overruns:60 frame:74
              TX packets:6016 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:835686 (816.0 Kb)  TX bytes:4243228 (4.0 Mb)
              Interrupt:177 Base address:0x6000

    eth1.1    Link encap:Ethernet  HWaddr ***
              inet addr:yyy  Bcast:yyy.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:91 (91.0 b)  TX bytes:64 (64.0 b)

    eth1.2    Link encap:Ethernet  HWaddr ***
    ...

    I can't see Interface eth1 in the webadmin interfaces list, so I can't change the MTU for it,
    this seems to be the problem.
    In the webadmin interfaces list I set the MTU for eth1.1, ... to 7200 but this seems to be ignored.

    Can anyone help me?
    Thanks,
    Andreas.
Reply
  • I have VLAN on one network card enabled and set the MTU of all VLAN's to 7200 (it's a network card with RTL 8169SC chipset). But I only can send ping packets with 1472 bytes size without defragmentation. I looked into the ASG's Support/Advanced/Interface Tables page, and I found the network card listed with MTU 1500 but I set it to 7200 for all VLAN on this card in the Interfaces configuration page.
    Is this a bug?


    Hello,
    in the meantime I started ifconfig from console, here is the output:

    eth1      Link encap:Ethernet  HWaddr ***
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5114 errors:60 dropped:14 overruns:60 frame:74
              TX packets:6016 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:835686 (816.0 Kb)  TX bytes:4243228 (4.0 Mb)
              Interrupt:177 Base address:0x6000

    eth1.1    Link encap:Ethernet  HWaddr ***
              inet addr:yyy  Bcast:yyy.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:1 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:91 (91.0 b)  TX bytes:64 (64.0 b)

    eth1.2    Link encap:Ethernet  HWaddr ***
    ...

    I can't see Interface eth1 in the webadmin interfaces list, so I can't change the MTU for it,
    this seems to be the problem.
    In the webadmin interfaces list I set the MTU for eth1.1, ... to 7200 but this seems to be ignored.

    Can anyone help me?
    Thanks,
    Andreas.
Children
No Data