Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 3 subscribers
  • Views 564 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[7.501] After Update to 7.501 MultiPath Rules not working

SveN_01
Hi,
I have two Uplink Interfaces (One ADSL and one SDSL).
I enabled Multipath for these two Interfaces.
The SDSL ist the top one on the Uplink-Balancing
Configuration Page in WebAdmin.

For testing purposes I created a Multipath-Rule [by Interface]
Any-Any-Any->ADSL

But all traffic is routed over the SDSL Interface!

Anyone the same problem?


This thread was automatically locked due to age.
Parents
  • 0
    Hi.
    In our case it (one leased line and 4 ADSL), the ADSL line still worked, but it seems that most of the traffic going to the leased line.
    Since we also had a lot of issues concerning HTTP proxy since 7.501, I went back to 7.5, and it seems that the multipath working much better and even.
Reply
  • 0
    Hi.
    In our case it (one leased line and 4 ADSL), the ADSL line still worked, but it seems that most of the traffic going to the leased line.
    Since we also had a lot of issues concerning HTTP proxy since 7.501, I went back to 7.5, and it seems that the multipath working much better and even.
Children
  • 0 in reply to Goldy_01
    Fixed that: I did not enable "Automatic Monitoring" and did not
    define any "Monitoring Hosts", that was the problem.
    I enabled "Automatic Monitoring" and now it works as expected!

    (Maybe WebAdmin could be changed not to allow such a missconfiguration....)

    cu SveN