Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP on additional addresses

Hi

I'm currently migrating an existing network from and old version of smoothwall to ASG7. The old network has the subnet of 172.16.0.1/24. The problem is that there is no obvius space to put the DHCP addresses. My plan was to add another subnet 172.16.1.1/24 on the same interface and use that for DHCP.

However, it seems i can only add a DHCP server on the primary subnet. The sulution would be to use 172.16.1.1/24 as the primary and add 172.16.0.1/24 as an additional subnet.

Will this work? What else do I need to do so everything works as expected?

I don't have lots experience with bigger networks.

Thanks!


This thread was automatically locked due to age.
Parents
  • The problem is that there is no obvius space to put the DHCP addresses.


    Hi, could you elaborate on this sentence? I'm not sure what your goal is.

    Barry
  • Sure. From the start we had 172.16.0.2-99 for static ip and everything above as dhcp space. Due to several reasons we now have many static ip configured in the 172.16.0.100-254 range.

    This makes it messy, and it is at this point not feasible to change this without breaking a lot of things. So my hopes was to run dhcp from a completly different subnet.
Reply
  • Sure. From the start we had 172.16.0.2-99 for static ip and everything above as dhcp space. Due to several reasons we now have many static ip configured in the 172.16.0.100-254 range.

    This makes it messy, and it is at this point not feasible to change this without breaking a lot of things. So my hopes was to run dhcp from a completly different subnet.
Children
No Data