This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configuration daemon log

I am getting for the past 2 hours (just after updating my workstation to 7.400) the following error messages:

2009:03:15-02:15:25 Astaro confd[8123]: id="3108" severity="info" sys="System" sub="confd" name="reloading storage" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90" version="65" storage="/cfg"

2009:03:15-02:15:25 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="freeze" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

2009:03:15-02:15:25 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="thaw" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

2009:03:15-02:15:26 Astaro confd[8123]: id="3108" severity="info" sys="System" sub="confd" name="reloading storage" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90" version="65" storage="/cfg"

2009:03:15-02:15:26 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="freeze" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

2009:03:15-02:15:26 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="thaw" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

2009:03:15-02:15:26 Astaro confd[8123]: id="3108" severity="info" sys="System" sub="confd" name="reloading storage" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90" version="65" storage="/cfg"

2009:03:15-02:15:26 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="freeze" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

2009:03:15-02:15:26 Astaro confd[8123]: id="3100" severity="info" sys="System" sub="confd" name="thaw" client="index.plx" facility="webadmin" user="admin" srcip="192.168.2.90"

the freeze bit concerns me? Is that something that you've seen before?

This thread was automatically locked due to age.

Parents

0 BarryG over 16 years ago

Freeze and Thaw in programming refer to storing data to a database or other long-term storage, and reading it back, respectively.

Somthing about doing it in Perl is here.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 wingman over 16 years ago in reply to BarryG

thank you for the fast reply

Should I worry (current log is 30mb just out of these messages)
Cancel
Vote Up 0 Vote Down

Cancel
0 BarryG over 16 years ago in reply to wingman

Maybe you should worry; my confd.log is only 742k today.
However, the update process has to convert a lot of data; see if it drops in a day or two.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 wingman over 16 years ago in reply to BarryG

Maybe you should worry; my confd.log is only 742k today.
However, the update process has to convert a lot of data; see if it drops in a day or two.

Barry

Hi BarryG

I've noticed that the conf file increases only when I am loggin in via gui.I will wait couple of days though
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 wingman over 16 years ago in reply to BarryG

Maybe you should worry; my confd.log is only 742k today.
However, the update process has to convert a lot of data; see if it drops in a day or two.

Barry

Hi BarryG

I've noticed that the conf file increases only when I am loggin in via gui.I will wait couple of days though
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data