This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

v4.23 strange console output

hi folks,

first of all > is it usal, that asl v4 puts the whole packetfilterlog on the console out?

drop: in=ppp0 out=...... and so on


the 2nd thing -> after watching it for a while i got this output

unable to handle kernel paging request at virtual address 057f88f0
printing eip:
c012ea72
*pde = 00000000
Oops: 0002
cpu: 0
eip: 0010:[] not tainted
eflags: 00010246
eax: c0266638 ebx: 00000000 ecx: c105b5ac edx: 057f88f0
esi: c105b590 edi: 00000015 ebp: 00001414 esp: c136bf34
ds: 0018 es: 0018 ss: 0018
process kswapd (pid: 4, stackpage=c136b000)
Stack: 00000202 c136a000 000001f6 000001d0 c02667d0 c12c50c0 cef94e80 c12c5858
       0000000c 00000020 000001d0 00000006 00000020 c012ee00 00000006 0000000e
       c02667d0 00000006 000001d0 c02667d0 00000000 c012ee60 00000020 c02667d0
Call Trace: [] [] [] [] []
[] [] [] []

code 89 02 c7 01 00 00 00 00 c7 41 04 00 00 00 00 a1 38 66 26 c0


what's going on here ?
i've tested ram, and the hdd bevor installing v4.
any ideas?


This thread was automatically locked due to age.
Parents
  • Do you have enough RAM?
    That seems to be saying it's out.

    Barry
  • i think 512mb  should be ok. i have changed the hdd configurationn yesterday evening (disabled block-mode) and till now there's neither a console output for packetfilter nor this stragne addresses.

    seems that everything is ok now.    - also no traffic stopps.
    let's hope!
  • didn't helped - same errors.
  • the system dumps log information if syslog is not running, pls check. Open a remote console (ssh) -> 'ps axwfu | grep -i syslog', you should get something like 
    [ QUOTE ]
    /usr/sbin/syslogd -m 60 -r -a /dev/log -a /var/chroot-ahi/dev/log -a /var/chroot-bind/dev/log -a /var/chroot-dhcpc/dev/log -a /var/chroot-dhcps/dev/log -a /var/chroot-ha/dev/log -a /var/chroot-identd/dev/log -a /var/chroot-ipsec/dev/log -a /var/chroot-pop3/dev/log -a /var/chroot-pppd/dev/log -a /var/chroot-pppoe/dev/log -a /var/chroot-pptp/dev/log -a /var/chroot-pptpc/dev/log -a  ....

    [/ QUOTE ]


    /etc/rc.d/syslog stop and start may be helpful.

    Greetings
    cyclops
Reply
  • the system dumps log information if syslog is not running, pls check. Open a remote console (ssh) -> 'ps axwfu | grep -i syslog', you should get something like 
    [ QUOTE ]
    /usr/sbin/syslogd -m 60 -r -a /dev/log -a /var/chroot-ahi/dev/log -a /var/chroot-bind/dev/log -a /var/chroot-dhcpc/dev/log -a /var/chroot-dhcps/dev/log -a /var/chroot-ha/dev/log -a /var/chroot-identd/dev/log -a /var/chroot-ipsec/dev/log -a /var/chroot-pop3/dev/log -a /var/chroot-pppd/dev/log -a /var/chroot-pppoe/dev/log -a /var/chroot-pptp/dev/log -a /var/chroot-pptpc/dev/log -a  ....

    [/ QUOTE ]


    /etc/rc.d/syslog stop and start may be helpful.

    Greetings
    cyclops
Children
  • [ QUOTE ]
    the system dumps log information if syslog is not running, pls check. Open a remote console (ssh) -> 'ps axwfu | grep -i syslog', you should get something like 
    usr/sbin/syslogd -m 60 -r -a /dev/log -a /var/chroot-ahi/dev/log -a /var/chroot-bind/dev/log -a /var/chroot-dhcpc/dev/log -a /var/chroot-dhcps/dev/log -a /var/chroot-ha/dev/log -a /var/chroot-identd/dev/log -a /var/chroot-ipsec/dev/log -a /var/chroot-pop3/dev/log -a /var/chroot-pppd/dev/log -a /var/chroot-pppoe/dev/log -a /var/chroot-pptp/dev/log -a /var/chroot-pptpc/dev/log -a  ....

    [/ QUOTE ]

     ok got it. so it seems that syslog is running but what about outputs of this kind?  

    unable to handle kernel paging request at virtual address 057f88f0
    printing eip:
    c012ea72
    *pde = 00000000
    Oops: 0002
    cpu: 0
    eip: 0010:[] not tainted
    eflags: 00010246
    eax: c0266638 ebx: 00000000 ecx: c105b5ac edx: 057f88f0
    esi: c105b590 edi: 00000015 ebp: 00001414 esp: c136bf34
    ds: 0018 es: 0018 ss: 0018
    process kswapd (pid: 4, stackpage=c136b000)
    Stack: 00000202 c136a000 000001f6 000001d0 c02667d0 c12c50c0 cef94e80 c12c5858
    0000000c 00000020 000001d0 00000006 00000020 c012ee00 00000006 0000000e
    c02667d0 00000006 000001d0 c02667d0 00000000 c012ee60 00000020 c02667d0
    Call Trace: [] [] [] [] []
    [] [] [] []

    code 89 02 c7 01 00 00 00 00 c7 41 04 00 00 00 00 a1 38 66 26 c0
  • Google says this could be flaky RAM or other hardware. 

    Barry
     
  • hmm,
     but ram, hdd and ps were tested ok. so that it could be just the stupid k7s5 board, but this is on the hcl. i and some friends had also some installation failures on different hardware, with and without an original cd - also testet diferent drives.
  • How large are your daily kernel and packet filter logs?
    You can run into problems with ASL v4 if these daily logs get too large. This is generally caused by the default log drop filter rules in the system causing all of the Microsoft Windows netbios beaconing traffic to be logged. The creation of appropriate drop rules migh be your solution. See the thread below for more info:

    https://community.sophos.com/products/unified-threat-management/astaroorg/f/53/t/33372