Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 7 subscribers
  • Views 14061 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.351 install question

MatthewFord

After installing UTM 9.351 software on a compatible PC and rebooting, should I be presented with the Linux console login screen or something else?  The installation appears to have been successful, but I am unable to browse or ping the Webadmin at the configured address of 192.168.2.100:4444 from a PC that is directly connected to the correct admin NIC and configured with a static IP of 192.168.1.10 and subnet 255.255.255.0 (no gateway defined).  Any thoughts?

I have been unable to locate a default password for the Linux console - I was thinking that if I could login and check ifconfig to verify it may help point me to the problem.



This thread was automatically locked due to age.
Parents
  • 0
    sorry - I had a type in the original post. My PC IP address is 192.168.2.10 subnet 255.255.255.0. The UTM admin ip is 192.168.2.100:4444.

    The console screen does not have the IP address listed. Just the standard linux login prompt. Root with empty password does not work.
  • 0 in reply to MatthewFord
    "The console screen does not have the IP address listed." - That sounds like a failed install, Matthew.

    Cheers - Bob
  • 0 in reply to BAlfson

    To reiterate, this is 9.351, in case it is different from previous versions.  And I used the "asg-9.351-3.1.iso" image.

    The installation screen did indicate that it finished successfully and provided IP address.

    Then, after reboot, the only failure was on the AD server, which I don't have:

    It did appear to wait for network configuration for a while, but, after the second "waiting for network configuration" message, it quickly flipped to the Ubuntu console screen:

     I have reinstalled 10+ times with same result, selecting both 64-bit and 32-bit kernels and always selecting the full install (not basic) with all additional tools with the same result upon reboot.

    Thanks for your help.

Reply
  • 0 in reply to BAlfson

    To reiterate, this is 9.351, in case it is different from previous versions.  And I used the "asg-9.351-3.1.iso" image.

    The installation screen did indicate that it finished successfully and provided IP address.

    Then, after reboot, the only failure was on the AD server, which I don't have:

    It did appear to wait for network configuration for a while, but, after the second "waiting for network configuration" message, it quickly flipped to the Ubuntu console screen:

     I have reinstalled 10+ times with same result, selecting both 64-bit and 32-bit kernels and always selecting the full install (not basic) with all additional tools with the same result upon reboot.

    Thanks for your help.

Children