Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 8821 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Syncing 2 UTMs

Ztirf
I have a SG105 running 9.315-2.  It works well except for the limited 2 Gb of RAM which makes for excessive memory swapping.  I built a Home Edition UTM but it is running 9.314-13 (latest download).  I would like to use a backup from my SG105 to update the configuration of my Home Edition (so that they are both in sync), but my SG backups jumped from 9.308 to 9.315 (skipping 9.314).

I am assuming that I cannot use my current 9.315 backup to update my Home Edition UTM (because it would be backing up and configuring an earlier version).  I am totally unfamiliar with updating the Home Edition.

(1) Will Up2Date bring my Home Edition up to 9.315-2?  Then I can use my SG backup straight forwardly.

(2) How else would I get my 2 UTMs in sync?


This thread was automatically locked due to age.
Parents
  • 0
    Will not having a WAN cable attached to one of the UTM be problematic? Might it matter which UTM (filled or empty) had the WAN attachment?
    No, this won't matter for configuration purposes.

    Might there be a more clever solution?
    Just this and the config-backup methods.  If you wanted to, you could print up the config of one and work off of it on the other, but can be a bit hard to read.  Support > Printable Configuration
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 0
    Will not having a WAN cable attached to one of the UTM be problematic? Might it matter which UTM (filled or empty) had the WAN attachment?
    No, this won't matter for configuration purposes.

    Might there be a more clever solution?
    Just this and the config-backup methods.  If you wanted to, you could print up the config of one and work off of it on the other, but can be a bit hard to read.  Support > Printable Configuration
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
No Data
Unfiltered HTML