Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sizing guidelines relative to UTM in datacenter (no local users)

I've been looking through the sizing guidelines documents for UTM 9.2/SG series devices and have a question about relating the recommendations to a SG series appliance that would be in a datacenter where there are no local users behind the device.

The datacenter has a 10mbps dedicated connection with average daily combined throughput (up/down) is 14-18Mbps.   There are also 40 VPN tunnels that would terminate to this device.  IPS/IDS would be the primarily used security service, and web server protection may be used for a few low traffic sites.

There are about 400 actual users who access services in the datacenter, of which ~300 of them are accessing over those VPN tunnels, and the rest of them of direct internet.  

Do I treat this user base that same as if I was sizing for an office with 400 users behind the firewall?  Or are these users treated differently in this scenario?


This thread was automatically locked due to age.
Parents
  • HD, you really should get hooked up with a reseller and have them make a recommendation - that gives them some skin in the game in case you've overlooked something in your description.  Depending on what the users and servers are doing, it's possible that a 200- or 300-series might work for you.

    This really isn't the right place to get this type of information and advice.

    Cheers - Bob
Reply
  • HD, you really should get hooked up with a reseller and have them make a recommendation - that gives them some skin in the game in case you've overlooked something in your description.  Depending on what the users and servers are doing, it's possible that a 200- or 300-series might work for you.

    This really isn't the right place to get this type of information and advice.

    Cheers - Bob
Children
No Data