Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 2688 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DNAT for NAS

masmith22
I am not able to configure DNAT to allow access to a NAS for the internet. Any help would be greatly appreciated. Mario


This thread was automatically locked due to age.
Parents
  • 0
    The DNAT rule is working. I started from scratch, wipe the box.
    1 - Web Protection - Filtering Options - Added a Allowed target service
       - Called TCP 8000
    2 - Network Protection - NAT - NAT - DNAT 
       - Condition
          - Traffic from Any
          - Using Service TCP 8000
          - Going to Ext WAN
        - Action
           - Destination - created network definition NAS DVR- Host IP address 192.168.0.50
           - Service to - TCP 8000
        - Auto Firewall Rule
        - Enable Rule
Reply
  • 0
    The DNAT rule is working. I started from scratch, wipe the box.
    1 - Web Protection - Filtering Options - Added a Allowed target service
       - Called TCP 8000
    2 - Network Protection - NAT - NAT - DNAT 
       - Condition
          - Traffic from Any
          - Using Service TCP 8000
          - Going to Ext WAN
        - Action
           - Destination - created network definition NAS DVR- Host IP address 192.168.0.50
           - Service to - TCP 8000
        - Auto Firewall Rule
        - Enable Rule
Children
No Data
Unfiltered HTML