Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I need some advices about hardware

Hello,

As I work as a network and system engineer, I've installed a Sophos UTM at home, running on an old computer :

Atom D510 with 2 network cards ( one on the motherboard, a Realtek) and an additionnal PCI Intel Network card. 

I have a 25 Mbps/1Mbps VDSL connection. 

The motherboard seems to have reliability problems, so I'm planning to change the hardware and I would like to buy hardware that will last and be able to handle an increased load : I think that in the next 2 years, I'll have a Fiber 500 Mbps/200 Mbps connection. 

I have selected this hardware :

1 x SuperMicro A1SAi-2750F mother board
2 x Kingston ValueRAM SO-DIMM 8 Go DDR3L 1333 MHz ECC CL9 
1 x Akasa Galileo case
1 x Kingston SSDNow V300 Series 120 Go for storage

I don't really care if I'm stuck at 100 Mbps per connection, but there is about 30 network devices in my house.

What do you think of this hardware ? The key feature here is that it is absolutely noise less and that is a key component here for me.


This thread was automatically locked due to age.
Parents
  • I'm running with a ...

    SuperMicro A1SRi-2758F and an Intel S3500 120GB SSD

    ... certainly more than is needed.  However, it fits my requirements of no fan, future growth, number of interfaces, IPMI, small form factor (Mini-Box M350).  Too often today's overkill can be tomorrow's dog.
  •  Too often today's overkill can be tomorrow's dog.


    That's why I'm willing to buy way too powerful hardware, because I hope that I invested for the next 7 or 8 years.
  • That's why I'm willing to buy way too powerful hardware, because I hope that I invested for the next 7 or 8 years.


    that works Unless you up your wan bandwidth then the performance is going to tank because of the single threaded nature of IPS.  Fewer vfaster cores is the best rule of thumb right now for UTM.  THis is why i would use a DC haslwell celey or i-3.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Reply
  • That's why I'm willing to buy way too powerful hardware, because I hope that I invested for the next 7 or 8 years.


    that works Unless you up your wan bandwidth then the performance is going to tank because of the single threaded nature of IPS.  Fewer vfaster cores is the best rule of thumb right now for UTM.  THis is why i would use a DC haslwell celey or i-3.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?