Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installation on ESXi with 2 hosts

Hi!

My first post here [:)]


I'm in the middle of an installation of 2 VMs and i have read allof of different solutions to the problems when running UTM in ESXi.

Right now im running 2 machines in HA active-passive on Home Licens.
Failover works i lost 2 pings from the outside in but on the clients the ping just tops working but when i try a random site it works.

And the second problem is when master is coming backup i have selected so that one i prefered master i loose like 8-10 pings and i think that is allot. Is thi normal or can i have missed some settings?

Im running both machines virth VMXNET3 NICs as the guide i used recommended that. (Should i change to E1000?)

And i have disabled virtual mac.
Enabled promiscuous on the vSwitch (unsure if i have to enable it on all the vSwitches that is used byt the two VMs (WAN,LAN,Sync)

The vmware system is a ESXi 5.5 2 host system with vCenter.


This thread was automatically locked due to age.
Parents
  • @darrellr: For equipment running behind the vmware cluster (PC's, physical servers, etc) the virtual mac wasn't an issue. What I ran across in testing back with ESXi 4.1 (may be 'fixed' in 5.x) was any VM inside the ESXi cluster that ran on the same host as the slave node, lost internet access as the vSwitch routed UTM bound traffic to the standby slave, not the master running on another node.
  • Yea, I have added the ignore conflict MAC adress to both of the sophos VMs on all NICs and still the same.

    Maybe im using the wrong installation media? (asg-9.211-3.1.iso)


    Or any other sugestions?
Reply Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?