Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installation on ESXi with 2 hosts

Hi!

My first post here [:)]


I'm in the middle of an installation of 2 VMs and i have read allof of different solutions to the problems when running UTM in ESXi.

Right now im running 2 machines in HA active-passive on Home Licens.
Failover works i lost 2 pings from the outside in but on the clients the ping just tops working but when i try a random site it works.

And the second problem is when master is coming backup i have selected so that one i prefered master i loose like 8-10 pings and i think that is allot. Is thi normal or can i have missed some settings?

Im running both machines virth VMXNET3 NICs as the guide i used recommended that. (Should i change to E1000?)

And i have disabled virtual mac.
Enabled promiscuous on the vSwitch (unsure if i have to enable it on all the vSwitches that is used byt the two VMs (WAN,LAN,Sync)

The vmware system is a ESXi 5.5 2 host system with vCenter.


This thread was automatically locked due to age.
Parents
  • On ESXi hosts you have to disable the virtual mac otherwise it will impact guests running on the slave node's host. Basically ESXi tries to play smart with vSwitches and won't route a packet out the physical interface if it sees a matching mac address on the vSwitch. Net result is loss of internet for those guests.
Reply
  • On ESXi hosts you have to disable the virtual mac otherwise it will impact guests running on the slave node's host. Basically ESXi tries to play smart with vSwitches and won't route a packet out the physical interface if it sees a matching mac address on the vSwitch. Net result is loss of internet for those guests.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?