Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Licensing Question

I have the home license and seem to keep hitting up against the 50 license limit.  I have two questions that I haven't found when looking around.

1)  I know the licenses are tied to ip addresses.  I had read on the forums that if I take out the gateway address on my internal devices that don't need internet access, that they won't count, but I'm not finding that to be true.  I have removed the gateway on all of my ip cameras, Cisco switches, VMware VMs that I test with that don't need to have internet access, but they keep getting counted back.  I saw they stay on for 7 days, but as some have renewed they are now showing twice!  I do point them to the UTM for NTP and DHCP, but nothing else.

2) Since I'm trying to mitigate my ip issue, but not having much luck, is there a way for me to buy a 25 user license to add to the free 50 home license?

I really like this product (I've used Sonicwall's at work and thought about getting a NSA 200, but this thing just seems slicker!).  I have it on a Supermicro MB with a 3.6 GHz i3-4160 and 8 GB of ram and it is so fast!

My other thoughts is if I moved all my VM's and ip cameras to a different VLAN or subnet that it would take care of this, but BOY that would be alot of work for my home network setup in terms of configuration and maintenance!


This thread was automatically locked due to age.
Parents
  • Hi Simpleone,

    The UTM counts whatever IP's it sees hitting or traversing the firewall or a running service of the UTM. That means anything that uses DHCP, DNS, NTP, etc will be counted (doubly so if it's using IPv6). IPs also stay in the count for a week so if something accidentally was seen by the UTM (bad device config) wait a week and it'll drop off.

    For internal things like printers & whatnot, set a static IP address, no gateway & no DNS. Should keep them from getting counted in future. Just be aware that if you move stuff to a separate subnet (VLAN or not), you can't use the UTM as the router because inter-subnet traffic will cross the UTM and will be counted.
Reply
  • Hi Simpleone,

    The UTM counts whatever IP's it sees hitting or traversing the firewall or a running service of the UTM. That means anything that uses DHCP, DNS, NTP, etc will be counted (doubly so if it's using IPv6). IPs also stay in the count for a week so if something accidentally was seen by the UTM (bad device config) wait a week and it'll drop off.

    For internal things like printers & whatnot, set a static IP address, no gateway & no DNS. Should keep them from getting counted in future. Just be aware that if you move stuff to a separate subnet (VLAN or not), you can't use the UTM as the router because inter-subnet traffic will cross the UTM and will be counted.
Children
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?