Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

At the risk of being boring... (blush)

... I'm looking at setting up a low-cost box for Sophos UTM (Home). My mother always told me that asking first was better than kicking myself later (actually, mostly, she told me something along the lines of 'you did _what_?'), so here I am. Um, asking :-).

My internet service is 100Mb Symetric.
The device set I'm considering is:

ECS KBN-I/5200 Motherboard
AMD A6-5200 Quad Core CPU
4Gb or 8Gb DRR3 RAM (I'm guessing 8Gb is probably advisory, but dollars are tight)
Dual port NIC

Headless mini-ITX case.

I've seen lots of builds here using Intel CPUs (I'd like to go to a Core i3, but I'm a church mouse at the moment (blush). Just not seen so many AMDs. If I may, would this type of build pose any issues with Sophos?


This thread was automatically locked due to age.
Parents
  • I am running mine with a Intel Celeron G1820 CPU (2.7GHz, 2 Core, 2 Threads, 2MB Cache, LGA1150 Socket, Box) which cost me £30 and a £45 motherboard.  More info in my thread on here.  Im seeing 150Mb downloads ok.  I guess it depends how hard you thrash your connection !

    Id the $ are tight - £ were here see what you have in stock !  I found I had a usable case, RAM and HDD for example.  I can upgrade processor without huge loss if UTM 10 calls for it !
  • I am running mine with a Intel Celeron G1820 CPU (2.7GHz, 2 Core, 2 Threads, 2MB Cache, LGA1150 Socket, Box) which cost me £30 and a £45 motherboard.  More info in my thread on here.  Im seeing 150Mb downloads ok.


    Hi, 

    Do you have the IPS enabled? The IPS is normally the biggest CPU bottleneck.

    Also, you should disable the HTTP Proxy (Web Protection) when running speed tests.

    Barry
  • Hi, 

    Do you have the IPS enabled? The IPS is normally the biggest CPU bottleneck.

    Also, you should disable the HTTP Proxy (Web Protection) when running speed tests.

    Barry


    I leave everything on including ips/web proxy when running speed tests.  It only makes the ping go nuts but doesn't affect the accuracy of the speed testing.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • I've found that leaving Web Protection Transparent Proxy on whilst performing Speed Tests on machines that cannot handle the load will significantly reduce throughput.

    Examples:

    • D525 Atom with Web Protection (T) off would yield 110-120 Megabit (saturating my ISP), while with it on I would be roughly around 20-30 Megabit.
    • E3-1275v3 VM, I am able to reach 110-120 Megabit regardless if IPS and Web Protection is enabled. One day when I enable Antivirus, I'll chime in if I lose any throughput.


    Regarding the D525, this only affected single stream situations, especially HTTP. During torrenting, I would still be able to saturate the 110-120 Megabit Network. Hope this helps [:)]
Reply
  • I've found that leaving Web Protection Transparent Proxy on whilst performing Speed Tests on machines that cannot handle the load will significantly reduce throughput.

    Examples:

    • D525 Atom with Web Protection (T) off would yield 110-120 Megabit (saturating my ISP), while with it on I would be roughly around 20-30 Megabit.
    • E3-1275v3 VM, I am able to reach 110-120 Megabit regardless if IPS and Web Protection is enabled. One day when I enable Antivirus, I'll chime in if I lose any throughput.


    Regarding the D525, this only affected single stream situations, especially HTTP. During torrenting, I would still be able to saturate the 110-120 Megabit Network. Hope this helps [:)]
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?