Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 6801 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Auto Startup Following Power Failure

mexim
Hi Guys,
Is there any way to configure the Sophos UTM to auto-boot following a power outage?

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    Good question...

    My experience so far with three different SG 2xx UTMs are that after initial DVD installation and poweroff command from the console (login as root with blank password -> poweroff), 0/1 switch on the back is ignored, only disconnecting and reconnecting power cable after several times with random 0/1 combinations is bringing the device up again ?
Reply
  • 0
    Good question...

    My experience so far with three different SG 2xx UTMs are that after initial DVD installation and poweroff command from the console (login as root with blank password -> poweroff), 0/1 switch on the back is ignored, only disconnecting and reconnecting power cable after several times with random 0/1 combinations is bringing the device up again ?
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML