Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Home - Hardware advice / experience

I first used Astaro in 2008-9 but parted company when I moved house. I've just installed the free home product on an old PC (some parts the same as last time!) but now its broadly delivering what I need and configured I want to upgrade the hardware.  Low power is important - my target is about 25w or less but current system is at 80-90w or so

I have a fast internet connection (for home)  160M down, 12M Up with a backup ADSL line (5/1) but would like to be able to add a 4G dongle since Im (just) in a coverage area.

Being a bit of a geek I have quite a lot of devices, but the house has structured cabling so most are wired. Two tablets and three mobiles are wireless, as will be the washing machine next week!  Everything else is wired. PCs (4), NAS(2), Sonos (7) for music , TiVo (Virgin TV recorders) DVD players, VOIP phones (6 devices)

While I want to keep the cost down it needs to do the job and have say 3 - 5 years life in it.

The easy bits seem:

HDD - WD Green
PSU - picoPSU
Case - existing

The plan is a Haswell motherboard with a celeron processor - I thought a G1820 would be plenty for my needs and a significant upgrade, but I have the option to upgrade significantly if not.

Motherboard MSI H81M Eco

How much RAM do people suggest ?  My current system has only 1G which is the minimum spec from Sophos.  

Im still researching NIC options, but will need two Gb cards and one 100M as a minimum. (one Gb port on board) Im not averse to a multi port card if this will perform well.

Any advice will be most welcome


This thread was automatically locked due to age.
  • Still waiting for my new motherboard to be delivered !

    However today I got the following speedtest which for my rickety old kit seemed quite impressive Speedtest.net by Ookla - My Results
  • and my Haswell i5 ~28W, but the i5 is much faster.


    my i7-4765T cant push IPS  (utm is on hyperv) at 210/10 speeds; i get about 90% with speedstep off

    its wierd that the cpu use is reported less than 10%
  • I have taken the next step of my upgrade.  

    Pico 150w PSU with 10a adapter
    MSI Eco H81M motherboard
    Intel celeron processer (initially)
    4G "stock" RAM
    NICs - on board Intel, Dell Dual port Intel card, Old Realtec card (unused)
    Existing 1.5T SATA HDD (to be replaced with low power option in time

    I installed using a USB key rather than a CD ROM.  Necessity being the mother of invention.  SATA only motherboard and only IDE CDs.

    Power consumption seems around 35w, CPU at 1% and RAM at 46% of 2.9G 94G installed ...)

    I'm running version 9.308-16

    Whilst throughput doesn't seem to measure much differently, the feel is a quicker interface etc

    Its worth noting that a restore of a backup from the old hardware left the device unconnectable - different NICs may be the cause, so I have had to reconfigure manually despite my plans to the contrary.

    The graphs are now working and my next issue is the 4G connection.
  • Im seeing a small throughput improvement.  Lastes speedtest is Speedtest.net by Ookla - My Results

    The 4G seems an issue - Im watching the 4G in a box thread with interest though.
  • I thought Id update this with a few performance details.

    Last weeks exec report is the source.

    CPU                      Average usage 1.97%  Peak 26.27
    Memory                 Average usage 59.6&   Peak 69.77
    Swap                    Average usage 9.54%   Peak 12.82
    Traffic Internet in   Average usage 2.24M    Peak 113M
    Traffic internet Out  Average           69k     Peak 2.2M

    Im happy to share more if it can be of assistance.

    Current speedtest Speedtest.net by Ookla - My Results

    I currently have 4G of RAM .  Would an expert recommend an upgrade based on this >
  • I currently have 4G of RAM .  Would an expert recommend an upgrade based on this >


    Hi,

    Check the RAM and SWAP usage under Reporting-Hardware. 
    You can save a screenshot and upload it here (hit 'Go Advanced' if the upload options don't appear below the reply box).

    Barry
  • Hi, I am running Sophos UTM Home in a Dell R210 i3 540 4GB HDD under esxi (1 vCPU and 2GB memory configuration) and my internet connection speed is 1gbps/500mbps. Currently, I am only getting 250/275 mbps while AV, IPS and Web Filter are enabled. Do you have any advice on how i can possibly speed up the throuput? This is for my home network btw.
  • Hi, I am running Sophos UTM Home in a Dell R210 i3 540 4GB HDD under esxi (1 vCPU and 2GB memory configuration) and my internet connection speed is 1gbps/500mbps. Currently, I am only getting 250/275 mbps while AV, IPS and Web Filter are enabled. Do you have any advice on how i can possibly speed up the throuput? This is for my home network btw.


    yes first you need 4 gigs of ram minimum.  Then you will need a minimum of 4 cpus heavily loaded to get that kind of speed.

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

  • yes first you need 4 gigs of ram minimum.  Then you will need a minimum of 4 cpus heavily loaded to get that kind of speed.


    thanks william. memory usage stays at 51% all the time and there are only 5 users so i doubt that adding more memory would help but i already purchased 8gb more so let's see when it arrives. i tried disabling IPS though and got 650/475 speed which is near to what i normally get (750/475) without the firewall.
  • thanks william. memory usage stays at 51% all the time and there are only 5 users so i doubt that adding more memory would help but i already purchased 8gb more so let's see when it arrives. i tried disabling IPS though and got 650/475 speed which is near to what i normally get (750/475) without the firewall.


    Like William said, you need a powerfull CPU to achieve those speeds with all the features switched on.

    Managing several Sophos UTMs and Sophos XGs both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

    Sometimes I post some useful tips on my blog, see blog.pijnappels.eu/category/sophos/ for Sophos related posts.

Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?