Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Home - Hardware advice / experience

I first used Astaro in 2008-9 but parted company when I moved house. I've just installed the free home product on an old PC (some parts the same as last time!) but now its broadly delivering what I need and configured I want to upgrade the hardware.  Low power is important - my target is about 25w or less but current system is at 80-90w or so

I have a fast internet connection (for home)  160M down, 12M Up with a backup ADSL line (5/1) but would like to be able to add a 4G dongle since Im (just) in a coverage area.

Being a bit of a geek I have quite a lot of devices, but the house has structured cabling so most are wired. Two tablets and three mobiles are wireless, as will be the washing machine next week!  Everything else is wired. PCs (4), NAS(2), Sonos (7) for music , TiVo (Virgin TV recorders) DVD players, VOIP phones (6 devices)

While I want to keep the cost down it needs to do the job and have say 3 - 5 years life in it.

The easy bits seem:

HDD - WD Green
PSU - picoPSU
Case - existing

The plan is a Haswell motherboard with a celeron processor - I thought a G1820 would be plenty for my needs and a significant upgrade, but I have the option to upgrade significantly if not.

Motherboard MSI H81M Eco

How much RAM do people suggest ?  My current system has only 1G which is the minimum spec from Sophos.  

Im still researching NIC options, but will need two Gb cards and one 100M as a minimum. (one Gb port on board) Im not averse to a multi port card if this will perform well.

Any advice will be most welcome


This thread was automatically locked due to age.
Parents
  • and my Haswell i5 ~28W, but the i5 is much faster.


    my i7-4765T cant push IPS  (utm is on hyperv) at 210/10 speeds; i get about 90% with speedstep off

    its wierd that the cpu use is reported less than 10%
Reply
  • and my Haswell i5 ~28W, but the i5 is much faster.


    my i7-4765T cant push IPS  (utm is on hyperv) at 210/10 speeds; i get about 90% with speedstep off

    its wierd that the cpu use is reported less than 10%
Children
  • I have taken the next step of my upgrade.  

    Pico 150w PSU with 10a adapter
    MSI Eco H81M motherboard
    Intel celeron processer (initially)
    4G "stock" RAM
    NICs - on board Intel, Dell Dual port Intel card, Old Realtec card (unused)
    Existing 1.5T SATA HDD (to be replaced with low power option in time

    I installed using a USB key rather than a CD ROM.  Necessity being the mother of invention.  SATA only motherboard and only IDE CDs.

    Power consumption seems around 35w, CPU at 1% and RAM at 46% of 2.9G 94G installed ...)

    I'm running version 9.308-16

    Whilst throughput doesn't seem to measure much differently, the feel is a quicker interface etc

    Its worth noting that a restore of a backup from the old hardware left the device unconnectable - different NICs may be the cause, so I have had to reconfigure manually despite my plans to the contrary.

    The graphs are now working and my next issue is the 4G connection.
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?