Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Home - Hardware advice / experience

I first used Astaro in 2008-9 but parted company when I moved house. I've just installed the free home product on an old PC (some parts the same as last time!) but now its broadly delivering what I need and configured I want to upgrade the hardware.  Low power is important - my target is about 25w or less but current system is at 80-90w or so

I have a fast internet connection (for home)  160M down, 12M Up with a backup ADSL line (5/1) but would like to be able to add a 4G dongle since Im (just) in a coverage area.

Being a bit of a geek I have quite a lot of devices, but the house has structured cabling so most are wired. Two tablets and three mobiles are wireless, as will be the washing machine next week!  Everything else is wired. PCs (4), NAS(2), Sonos (7) for music , TiVo (Virgin TV recorders) DVD players, VOIP phones (6 devices)

While I want to keep the cost down it needs to do the job and have say 3 - 5 years life in it.

The easy bits seem:

HDD - WD Green
PSU - picoPSU
Case - existing

The plan is a Haswell motherboard with a celeron processor - I thought a G1820 would be plenty for my needs and a significant upgrade, but I have the option to upgrade significantly if not.

Motherboard MSI H81M Eco

How much RAM do people suggest ?  My current system has only 1G which is the minimum spec from Sophos.  

Im still researching NIC options, but will need two Gb cards and one 100M as a minimum. (one Gb port on board) Im not averse to a multi port card if this will perform well.

Any advice will be most welcome


This thread was automatically locked due to age.
Parents
  • Hi ErringC,

    Looking over your specs, can't see anything wrong. Board has an Intel NIC (stay away from Realtek NIC's as they're known to be flaky under load) so should be good. Single & dual port Intel or Broadcom giabit NIC cards should work fine, multiport cards can be a bit pricy at times but will work.

    RAM should be at least 4GB but is cheap so run 8GB if you can justify the extra cost. I run my UTM instance (I've virtualized using ESXi) with 6GB and most features turned on. Running on a 50/10 DSL connection (getting it bumped to 100/20 this morning) I run around 25% RAM utilization.
Reply
  • Hi ErringC,

    Looking over your specs, can't see anything wrong. Board has an Intel NIC (stay away from Realtek NIC's as they're known to be flaky under load) so should be good. Single & dual port Intel or Broadcom giabit NIC cards should work fine, multiport cards can be a bit pricy at times but will work.

    RAM should be at least 4GB but is cheap so run 8GB if you can justify the extra cost. I run my UTM instance (I've virtualized using ESXi) with 6GB and most features turned on. Running on a 50/10 DSL connection (getting it bumped to 100/20 this morning) I run around 25% RAM utilization.
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?