Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 4834 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA Hot-Standby with STP enabled switch ?

vilic
Hi, 

Does anyone have experience or advice with HA Active/Passive cluster implementations with  Spanning Tree Protocol enabled on the switch (LAN) ?

My plan is to connect UTM interfaces in this way:

- LAN - both connected to the Cisco switch with STP enabled.
- WAN - both connected to simple L2 switch.
- ETH3 - crossover cable.

Is there anything that I should be concerned about ?


This thread was automatically locked due to age.
Parents
  • 0
    Hi. 
    I have installed 2 Utm 220 in A/P configuration almost 2 years ago.
    Both Utm are connected to 2 lan switch with 2 nics each (for failover purpose) with LACP enabled too. 
    No stp is enabled.
    Everything works great with no issue.

    If you need more info, ask!!! ������
Reply
  • 0
    Hi. 
    I have installed 2 Utm 220 in A/P configuration almost 2 years ago.
    Both Utm are connected to 2 lan switch with 2 nics each (for failover purpose) with LACP enabled too. 
    No stp is enabled.
    Everything works great with no issue.

    If you need more info, ask!!! ������
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML