Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM - new hardware - and some questions on hardware

I am a home user. I recently upgraded from the Astaro 7.x version to the latest Sophos version. 

After the upgrade, I had to turn IPS off, and go down to 1 AV scanner to boost the performance of the proxy to a reasonable speed. I am currently on an old AMD CPU dual core, 2.3? GHZ with only 2 GB of RAM. 

As such, this is what I am looking for.

[LIST=1]
  • Raw performance with a 35mbit up/down connection.
  • IPS  - on
  • Dual AV - on
  • Application control - on with a lot under control 
  • A firewall blocking a ton of countries via CIDR - More on this later.
  • APT - on
  • Email protection - on
  • VoIP setup -on - eventually
  • Web filtering on and locked hardcore and under Sophos it is slower.
  • Endpoint protection - maybe
  • Wireless protection - to be used soon
  • Keeping this hardware for another 5+ years
  • Saving energy where possible
[/LIST]

I currently have 4 separate networks. 
1. WAN
2. Highly locked down internal network. (Banking, shopping, etc. done here)
3. Open network, just using firewall rules and no proxy - Linux only + TV + VOD
4. Hacklab network - Used for when I do security research - wide open 

Knowing all of this, here is what I am thinking:

Asus H81M-K motherboard - Listed in unofficial HCL. 
Intel 17-4790K CPU 4.0 GHZ base with 4.4 Turbo!
16 GB of Crucial Ballistix Tactical PC3 12800 RAM
A new SATA 6 hard drive.

About $560, without the hard drive. 

I have to make sure the CPU cooler will fit in my 2U case. 

I have to see if that is the correct RAM for that motherboard, but it would be more or less the same.

Questions:

They make a low power version of that CPU that is clocked at 3.2GHZ and turbos up to 4.0 It runs cooler and is less power hungry.

1. I am assuming the UTM take advantage of the Turbo. Am I correct? 

2. How much performance do you think I will lose using the slower, low power version of that CPU, over a lifetime of 5 years?

I would like to add a separate network for my wireless. 

3. How many NICs am I limited to on the home version? I can only see 4 of the 5 ports under interfaces.


This thread was automatically locked due to age.
Parents
  • My main issues is my current system is it is so slow. The CPU gets pegged and I think it is due to AV. A small PDF I was opening in the browser took forever! I have AV set to just one scanner, no IPS, and it still gets very slow. I want to turn all of that "up". My understanding is that the AV will require more CPU speed then most things. Is this true? What about the IPS? What things can I load into RAM to speed things up? (I thought I read that someone had URL blocks in RAM...) What about multi-core CPU's?

    My goal is to keep my next FW for as long as I have had this one. 6+ years. So having a little room to grow with upgrades is good. I am not too concerned about cost or energy consumption. Overkill now, will not be overkill 5 years from now. At least that is my thinking.
Reply
  • My main issues is my current system is it is so slow. The CPU gets pegged and I think it is due to AV. A small PDF I was opening in the browser took forever! I have AV set to just one scanner, no IPS, and it still gets very slow. I want to turn all of that "up". My understanding is that the AV will require more CPU speed then most things. Is this true? What about the IPS? What things can I load into RAM to speed things up? (I thought I read that someone had URL blocks in RAM...) What about multi-core CPU's?

    My goal is to keep my next FW for as long as I have had this one. 6+ years. So having a little room to grow with upgrades is good. I am not too concerned about cost or energy consumption. Overkill now, will not be overkill 5 years from now. At least that is my thinking.
Children
No Data