Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM220 HA Cluster - Swap sizes different!

Hi all
We had to RMA one of our UTM220 devices for a faulty ethernet port.  We got a replacement and it has been running ever since (about 2 months)

Today I just happened to notice while poking around that the 2 devices have different amount of Swap configured:


I assume this might be a problem with the Active-Active setup.  Is there a way I can fix it so they both match? Also not sure which one is "correct" - 2gb or 3gb. thanks.


This thread was automatically locked due to age.
Parents
  • NOTE: Increasing the size of the swap can result in losing support and it will influence the behavior of the system.

    So only do this if you know what you're doing...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • NOTE: Increasing the size of the swap can result in losing support and it will influence the behavior of the system.

    So only do this if you know what you're doing...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?